职称		教授/博导
联系方式	办公电话
	Email
	研究所	测试测量与仪器
	联系地址
研究方向		无缺陷连铸坯控制技术、钢液中有害元素脱除方法等

学习工作经历

1980.09～1984.07重庆大学化学冶金专业学习，获工学学士学位

1987.09～1990.01重庆大学钢铁冶金专业学习，获工学硕士学位

1992.09～1996.12重庆大学钢铁冶金专业学习，获工学博士学位

1993.12晋升为副教授

2000.12晋升为教授

2002.04批准为冶金工程学科博士生导师

2006.11～2007.10在美国卡内基梅隆大学（Carnegie Mellon University）钢铁研究中心（CISR）作访问学者

其余时间、至今在重庆大学工作；曾任连铸研究室主任和冶金系主任，中国金属学会青年工作委员会委员。

社会兼职

《炼钢》杂志编委

重庆市金属学会理事

学术专长

1）利用物理与数值模拟方法对中间包控流装置、结晶器（包括双锟薄带熔池）伸入式水口设计、评估以及如中包起旋高度、拉速与水口吹氩流量的关系等工艺参数的设计。合作单位有：国家自然科学基金委、西安重型机械研究所、宝钢、武钢、攀钢、马钢、成钢、邯钢、太钢、济钢、重钢、昆钢、南钢、沙钢、维苏威高级陶瓷（苏州）有限公司等企业。

2）连铸结晶器保护渣。该研究方向得到国家自然科学基金四次资助，提出的含钛无氟连铸保护渣理论已得到发明专利授权。合作单位有：宝钢、马钢、重钢、南钢、梅钢、沙钢、珠钢等钢铁企业。与国内连铸保护渣龙头企业—河南西峡保护材料集团公司十年合作，研发的各种机型、拉速、钢种的结晶器连铸保护渣不仅应用在国内所有大中型钢铁企业，而且在海外市场也占一定分额。

3）连铸二冷制度的优化及建立。合作单位有：宝钢、邯钢、太钢、重钢、马钢、南钢等钢铁企业。研发的板坯连铸二冷制度仿真软件应用方便、可靠，得到企业认可。研发的连铸喷嘴性能测试装置，克服了传统检测方法的缺点，有着操作性和维护性强的优点。获国家发明专利。马钢、涟钢、河北理工大学及数家喷嘴生产厂家相继购置了该设备。

4）铸坯质量控制研究，尤其是铸坯角部横裂纹的控制，获国家自然科学基金资助。主要合作单位有宝钢、新疆八钢、攀钢、马钢、梅钢、太钢、重钢、南钢、沙钢等企业。

5）连铸结晶器保护渣性能检测及保护渣使用标准的建立。合作单位有：南钢、宝钢、马钢、梅钢、武钢、河北理工大学、美国卡内基梅隆大学等企业和学校。

主要研究方向

无缺陷连铸坯控制技术

钢液中有害元素脱除方法

结晶器保护渣

冶金过程固体废弃物综合利用

科研项目

负责国家自然科学基金项目3项、主研3项、参研2项；负责十一五国家支撑计划子项目1项，重大专项子课题1项，国家留学回国人员基金和重庆市自然科学基金各1项，近100项企业合作项目。近五年负责科研项目实到经费750万元。

论文及专著

在《Metall. and Mater. Trans.B》、《ISIJ International》、《Ironmaking & Steelmaking》、《Steel Research International》、《Journal of  Non-Crystalline Solids》、《Journal of Iron and Steel Research International》、《Journal of University of Science and Technology Beijing》(English Edition)、《钢铁》、《金属学报》、《中国有色金属学报》、《钢铁研究学报》、《工程力学》、《应用力学学报》等国内外刊物和会议上发表论文180余篇，其中被SCI收录论文45篇（他引100余次），EI收录论文60篇。SCI收录论文如下：

45、Li, J;Wen, GH; Tang, P; Zhu, MM; Gao, JJ; Liu, HL，Fluid Flow and Inclusion Motion in a Multi-Heat Teeming Tundish for Heavy Steel Ingot，JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL，出版年: NOV 2012 ，卷: 19  期: 11  页: 19-26

44、Wen, GH; Tang, P; Yang, B; Zhu, XB，Simulation and Characterization on Heat Transfer through Mould Slag Film，ISIJ INTERNATIONAL，出版年: 2012，卷: 52  期: 7  页: 1179-11185

43、Li, J; Wen, GH; Zhu, MM; Tang, P，A NEW APPLICATION OF TURBULATOR IN REMOVING INCLUSIONS BY INJECTING GAS FROM THE SHROUD，METALURGIA INTERNATIONAL，出版年:2012， 卷:17   期:7   页:57-62

42、Wen, GH; Huang, YF; Tang, P; Zhu, MM，Improvement of tundish shape and optimization of flow control devices for sequence casting heavy steel ingots, INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 出版年: JAN 2012，卷: 19  期: 1  页: 15-20

41、Li, J;Wen, GH; Tang, P; Zhu, MM，Study on geometric dimension design of multiheat teeming tundish for heavy steel ingots，IRONMAKING & STEELMAKING，出版年: FEB 2012，卷: 39  期: 2  页: 140-146

40、Luo, W; Yan, B; Xiong, YX ;Wen, GH;Xu, HL，Improvement to secondary cooling scheme for beam blank continuous casting，IRONMAKING & STEELMAKING，出版年: FEB 2012，卷: 39  期: 2  页: 125-132

39、Li, J ; Wen, GH；Tang, P ; Zhu, MM，Modeling study of the influence of flow control devices on metallurgical effects in a large-capacity and deep bath tundish，Applied Mechanics and Materials，出版年: 2011，卷: 71-78  页: 4411-4415

38、Wen, GH; Zhu, XB; Tang, P ; Yang, B; Yu, X，Influence of Raw Material Type on Heat Transfer and Structure of Mould Slag，ISIJ INTERNATIONAL，出版年: 2011，卷: 51  期: 7  页: 1028-1032

37、Wang, H ; Tang, P; Wen, GH; Yu, X，Effect of Na(2)O on crystallisation behaviour and heat transfer of high Al steel mould fluxes，IRONMAKING & STEELMAKING，出版年: JUL 2011，卷: 38  期: 5  页: 369-373

36、Zhang, ZT; Wen, GH; Zhang, YY，Crystallization behavior of F-free mold fluxes，INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS ，出版年: APR 2011， 卷: 18  期: 2  页: 150-158

35、Ma, FJ; Wen, GH; Tang, P; Xu, GD; Mei, F; Wang, WL，Effect of Cooling Rate on the Precipitation Behavior of Carbonitride in Microalloyed Steel Slab，METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE，出版年: FEB 2011，卷: 42  期: 1  页: 81-86

34、Zhu, MM; Wen, GH; Tang, P，PHYSICAL AND MATHEMATICAL MODEL ON FLUID FLOW CHARACTERISTICS IN A POOL FOR TWIN ROLL STRIP CASTER，METALURGIA INTERNATIONAL ， 出版年: 2011，卷: 16  期: 10  页: 48-53

33、Zhu, MM; Wen, GH; Tang, P; Chen, YQ，ANALYTICAL METHOD FOR FLOW PATTERN IN MULTI-STRAND TUNDISH，METALURGIA INTERNATIONAL，出版年: 2011， 卷: 16  期: 6  页: 29-32

32、Yu, X; Wen, GH; Tang, P; Ma, FJ; Wang, H，Behavior of Mold Slag Used for 20Mn23Al Nonmagnetic Steel During Casting，JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL， 出版年: JAN 2011，卷: 18  期: 1  页: 20-25

31、Zhu, MM; Wen, GH; Tang, P，PHYSICAL AND NUMERICAL SIMULATION ON FLUID FLOW AND HEAT TRANSFER IN A FOUR-STRAND BLOOM TUNDISH，METALURGIA INTERNATIONAL， 出版年: 2011， 卷: 16   期: 2   页: 11-15

30、Xu, HL; Wen, GH;Sun, W; Wang, KZ; Yan, B，Analysis of Thermal Behavior for Beam Blank Continuous Casting Mold，JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL，出版年: DEC 2010 ，卷: 17  期: 12  页: 17-22

29、Chen, ZP; Wen, GH; Jiang, ZK，Mould Powder Characteristics of High Speed for CC Low Carbon Steel Slab，JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL 出版年: DEC 2010， 卷: 17  增刊: 2   页: 73-77

28、Zhang, ZT; Wen, GH; Liao, JL; Sridhar, S，Observations of Crystallization in Mold Slags with Varying Al(2)O(3)/SiO(2) Ratio，STEEL RESEARCH INTERNATIONAL，出版年: JUL 2010，卷: 81  期: 7  页: 516-528

27、Xu, HL; Wen, GH; Sun, W; Wang, KZ; Yan, B; Luo, W，Thermal behaviour of moulds with different water channels and their influence on quality in continuous casting of beam blanks，IRONMAKING & STEELMAKING，出版年: JUL 2010， 卷: 37  期: 5  页: 380-386  

26、Qi, X; Wen, GH; Tang, P，Viscosity and Viscosity Estimate Model of Fluoride-Free and Titanium-Bearing Mold Fluxes，JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL，出版年: JUN 2010， 卷: 17  期: 6  页: 6-10

25、Yu, X; Wen, GH; Tang, P; Yang, B，Characteristics of Heat Flux Through Slag Film of Mold Slag Used for High Al-TRIP Steel Casting，JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL，出版年: MAY 2010，卷: 17  期: 5  页: 11-16

24、Ma, FJ; Wen, GH; Tang, P; Yu, X; Li, JY; Xu, GD; Mei, F，In situ observation and investigation of effect of cooling rate on slab surface microstructure evolution in microalloyed steel，IRONMAKING & STEELMAKING，出版年: APR 2010， 卷: 37  期: 3  页: 211-218

23、Ryu, HG; Zhang, ZT; Cho, JW; Wen, GH; Sridhar, S，Crystallization Behaviors of Slags through a Heat Flux Simulator，ISIJ INTERNATIONAL， 出版年: 2010， 卷: 50  期: 8  页: 1142-1150

22、Ma, FJ; Wen, GH; Tang, P; Yu, X; Li, JY; Xu, GD; Mei, F，Causes of transverse corner cracks in microalloyed steel in vertical bending continuous slab casters，IRONMAKING & STEELMAKING，出版年: JAN 2010，卷: 37  期: 1  页: 73-79  

21、Yu, X; Wen, GH; Tang, P; Wang, H，Investigation on viscosity of mould fluxes during continuous casting of aluminium containing TRIP steels ，IRONMAKING & STEELMAKING，出版年: NOV 2009，卷: 36  期: 8  页: 623-630  

20、Niu, YQ; Liu, YH; Zhang, ZK; Wang, P; Luo, BP; Tang, P; Wen, GH，Development and Application of Medium Carbon Steel Mold Powder of CSP CC，JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL，出版年: MAY 2009，卷: 16  页: 241-245

19、Liu, H; Wen, GH; Tang, P，Crystallization Behaviors of Mold Fluxes Containing Li(2)O Using Single Hot Thermocouple Technique ，ISIJ INTERNATIONAL，出版年: 2009，卷: 49  期: 6  页: 843-850  

18、Qi, X; Wen, GH; Tang, P，Investigation on heat transfer performance of fluoride-free and titanium-bearing mold fluxes，JOURNAL OF NON-CRYSTALLINE SOLIDS，出版年: DEC 15 2008，卷: 354  期: 52-54  页: 5444-5452  

17、Zhao, YH; Tang, P; Wen, GH; Ba, JT，Effect of Mold Slag Film Structure on Heat Transfer，JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL，出版年: OCT 2008，卷: 15  页: 747-752

16、Ba, JT; Wen, GH; Tang, P; Zhao, YH; Qi, X; Ma, FJ，Study on Measuring Method About Horizontal Heat Transfer of Mold Slag Film，JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL，出版年: OCT 2008，卷: 15  页: 767-772

15、Liu, H; Wen, GH; Tang, P，Crystallization Behavior of Quarternary Mold Slag Using the Single Hot Thermocouple Technique，JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL，出版年: OCT 2008，卷: 15  页: 773-777

14、Xu, HL; Wen, GH; Tang, P，Study on Behavior of Slag Entrapment in Mold for Slab Caster，JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL，出版年: OCT 2008，卷: 15  页: 778-784

13、Liang, K; Wen, GH; Tang, P; Zhi, JJ; Yuan, W，Study on Behavior of Flow Field in Wide-Thick Slab Mold，JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL，出版年: OCT 2008，卷: 15  页: 93-97

12、Wen, GH; Liu, H; Tang, P，CCT and TTT diagrams to characterize crystallization behavior of mold fluxes，JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL，出版年: JUL 2008，卷: 15  期: 4  页: 32-37  

11、Tang, P; Xu, CS; Wen, GH; Zhao, YH; Qi, X，Heat flux through slag film and its crystallization behavior，JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL，出版年: JUL 2008，卷: 15  期: 4  页: 7-+  

10、Tang, P; Yu, YY; Wen, GH; Zhu, MM; Zhou, L; Long, YJ; Liang, Q，Study on the optimization of the combined blown converter process in Chongqing Iron and Steel Company，JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING， 出版年: FEB 2008，卷: 15  期: 1  页: 5-9  

9、Zhang, ZT; Wen, GH; Tang, P; Sridhar, S，The influence of Al2O3/SiO2 ratio on the viscosity of mold fluxes，ISIJ INTERNATIONAL，出版年: 2008，卷: 48  期: 6  页: 739-746

8、Wang, C; Matsuura, H; Kikuchi, N; Wen, GH; Sridhar, S，Experimental simulation of the role of Ti on transient reactions in Al-killed Fe-melts，REVUE DE METALLURGIE-CAHIERS D INFORMATIONS TECHNIQUES，出版年: JAN 2008，卷: 105  期: 1  页: 22-32

7、Zhu, MM; Wen, GH; Tang, P; Wang, YF，Dissymmetric flow phenomenon in a multistrand tundish，JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING，出版年: DEC 2007，卷: 14  期: 6  页: 490-494  

6、Wang, YF; Wen, GH; Tang, P; Zhu, MM; Chen, YQ; Song, WZ，Mathematical modeling of fluid flow, heat transfer and inclusion transport in a four strand tundish，JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING，出版年: FEB 2007，卷: 14  期: 1  页: 22-26  

5、Wen, GH; Sridhar, S; Tang, P; Qi, X; Liu, YQ，Development of fluoride-free mold powders for peritectic steel slab casting，ISIJ INTERNATIONAL，出版年: 2007，卷: 47  期: 8  页: 1117-1125  

4、Matsuura, H; Wang, C; Wen, GH; Sridhar, S，The transient stages of inclusion evolution during Al and/or Ti additions to molten iron，ISIJ INTERNATIONAL，出版年: 2007，卷: 47  期: 9  页: 1265-1274  

3、Wen, GH; Zhang, LF; Tang, P; Su, ZJ; Zhu, MM; Gu, W; Zhao, KW，Modeling study on fluid flow and inclusion motion in 6-strand bloom caster tundishes，JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING, 出版年: AUG 2004, 卷: 11  期: 4  页: 310-314  

2、Wen, GH; Tang, P; He, JF; Xu, CS, Behavior of liquid steel in mold for thin slab caster, JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL，出版年: NOV 2003，卷: 10  期: 4  页: 18-22  

1、Wen, GH; Zhu, MM; Ding, PD; He, JF，Study on level fluctuation of twin roll strip caster by water modeling，JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL，出版年: NOV 2002，卷: 9  期: 2  页: 10-14

专利

连铸水口接缝密封剂及其制造工艺，发明专利获权证书号：ZL 03 1 17824.3，1998

含钛高炉渣的无氟连铸保护渣及其制造工艺，发明专利获权证书号：ZL 03 1 17824.3, 2005

连铸二冷喷嘴特性检测方法及装置，发明专利获权证书号：ZL 2005 1 0057472.1

一种钢水复合精炼剂，发明专利获权证书号：ZL 2006 1 0054339.5

连铸结晶器内渣膜热流检测方法及装置，发明专利获权证书号：ZL 2006 1 0095181.6

一种薄板坯连铸结晶器用浸入式水口，实用新型专利获权证书号：ZL200920294084.9

一种异型坯连铸结晶器冷却水缝，实用新型专利获权证书号：ZL201020219384.3

一种低SiO2和Al2O3含量的LF-VD炉还原精炼渣，发明专利获权证书号：ZL 2010 1 0611914.3

一种低硅低锰超纯转子钢冶炼工艺方法, 发明专利获权证书号：ZL 2010 1 0611912.4

表彰及奖励

连铸过程流体运动的数理模拟研究及其应用，获国家教育部（原教委）科技进步二等奖，1994。